Forstner Drill Bits In Stock Now

WHAT IT DOES

A Forstner bit set is a collection of specially designed drill bits used for drilling flat-bottomed holes with clean edges. These bits have a cylindrical shape with a sharp outer cutting edge and a centering point, allowing for precise drilling without splintering or tearing the material. They can be used to drill overlapping holes, holes on the edge of material, and holes of various diameters.
Forstner bits are commonly used in woodworking for tasks such as drilling pocket holes, creating recesses for hinges, making dowel holes, and creating mortises for joinery. They are also used in metalworking for creating flat-bottomed holes in materials like aluminium and brass.

ABOUT THIS TOOL 

Set of 5 Forstner Drill bits for drilling circular holes in wood. From 15mm up to 35mm

SAFETY INFORMATION & PPE

• Safety glasses – Essential
• Ear Protection – Essential
• Mask – Recommended particularly when you are working with materials that generate dust or debris

Safety glasses, ear protection, and other PPE are available for a suggested donation at check out.

YOU MAY ALSO NEED

• Pencil, Ruler, Set Square – Essential to mark your workpiece. Measure twice, cut once!
• Clamps – Useful to hold your work securely in place and prevent it from moving.
• Workbench and/or trestles – Useful to not break your back.

HOW TO USE IT

Clamp the workpiece securely to a stable work surface and tighten the chuck securely to hold the bit in place in the drill.
Best is to apply steady pressure to the Forstner bit as you begin drilling into the workpiece. Keep the drill speed moderate to prevent overheating. It will help you get a cleaner cut too.

INSTRUCTIONAL VIDEOS

Note this video is a general introduction and is not specific to this exact tool. We always advise reading the manual if provided below, especially the safety advisories, before using any tools.